FEATURES
- Steel construction
- Superior corrosion resistance
- Smooth interior for easy wire pull-thru
- Easy installation to follow contours
- Extra flexibility for simplified positioning
- RoHS WEEE compliant
- Complies with UL-1 , WW-C-566C Federal Specification
- +400° F Maximum temperature
NEC Articles
- Article 250.102, 250.118(5) and 250.134 (B) Equipment Grounding
- Article 501.10, Class l, Div. 2: Classes ll and lll
- Article 502.10, Class ll, Div. 1 & 2
- Article 503.10, Class lll, Div. 1 & 2
- Article 620.21 Elevators, Escalators and Platform Lifts
- Article 645/5 (D) (2) Information Technology Equipment
- Article 348 flexible metal conduit. (FMC)
- Article 430.223 Raceway connection to motors
USES
International Flexible Steel Conduit can be used where Underwriters Laboratories listing is required.
FEATURES
- Primary aluminum alloy construction
- Tempered alloy for maximum strength
- Lightweight, easy to cut
- Superior corrosion resistance
- Smooth interior for easy wire pull-thru
- Easy installation to follow contours
- Exceptional crush proof qualities
- Built-in flexibility for simplified positioning
- +400° F Maximum temperature
- RoHS WEEE compliant
- Complies with UL-1, NEC Article 348 and Federal Specification WW-C-566C
- Firewall penetration rating one and two hours per UL 1479 and ANSI standards E119 and E814
- One-third the weight of steel
NEC Articles
- Article 250.102, 250.118(5) and 250.134 (B) Equipment Grounding
- Article 348 .exible metal conduit. (FMC)
- Article 350 Liquidtight Flexible Metal Conduit
- Article 501.10, Class I, Div. 2: Classes II and II
- Article 501.10, Class l, Div. 2: Classes ll and lll
- Article 502.10, Class ll, Div. 1 & 2
- Article 503.10, Class lll, Div. 1 & 2
- Article 604.6 manufactired wiring system
- Article 620.21 Elevators, Escalators and Platform Lifts
- Article 645/5 (D) (2) Information Technology Equipment
USES
International Flexible Aluminum Conduit allows electrical contractors to run hundreds of feet of conduit without installing connectors between sections of conduit or the need for frequent braces to support the weight.
R E D U C E D W A L L A L U M I N U M, TYPE RWA
R E D U C E D W A L L S T E E L , TYPE RWS
FEATURES
- Durable, abrasion resistant PVC jacket
won't wrinkle or shrink from cut ends
- Exceptional crush proof qualities
- Smooth interior for easy wire pull-thru
- Complete protection against most liquids
and moisture vapor
- Resists sunlight, heat, oil and chemical
- degradation; Rated: -20° C to +60° C
(- 5° F to +140° F)
- Accepts standard UL Listed liquid-tight connectors
- The armor is approved as an equipment ground in
sizes 3/8" through 1-1/4"
- Superior protection for circuits located in hostile
environments
- Installs quickly and easily from handy payout carton
- Complies with UL standard 360
- Copper bond wire in 3/8"- 1 1/4"
- Standard package is shrinkwrapped coils
- RoHS WEEE compliant
- Approved for direct burial and in concrete
NEC ARTICLES
- Article 250.118 Equipment Grounding
- Article 300.22 Air Plenum
- Article 350 Liquidtight Flexible Metal Conduit
- Article 501.10, Class l, Div. 2: Classes ll and lll
- Article 502.10, Class ll, Div. 1 & 2
- Article 503.10, Class lll, Div. 1 & 2
- Article 511.7, Above class l Locations
- Article 620.21 Elevators, Escalators and Platform Lifts
- Articles 645.5 Information Technology Equipment
- Article 680.42 Pools, Hot Tubs and Fountains
- Article 695.6 Electrical Fire Pump
USES
International UALT gives protection for wiring circuits located in extremely wet or damp areas.
Also suitable for machines and equipment where ruggedness is required. Now in use on presses,
welders, pumps, blowers, grinders, conveyors, automated lines, etc.
LIQUID-TIGHT F L E X I B L E METALLIC CONDUIT, TYPE UALT
LIQUID-TIGHT F L E X I B L E NON-METALLIC CONDUIT, TYPE NMUA
FEATURES
- Flexible but tough; crush, abrasion
and strain resistant
- Resistant to oil, water and most chemicals
- One-piece construction; no component
separation
- Smooth interior finish facilitates easy wire pulling
- Remains flexible from: -20° C to +80° C (-5° F to +176° F)
- RoHS WEEE compliant
- Lightweight; cuts easily and saves labor
- Resists ultraviolet rays
- Installs quickly; cuts easily with a sharp knife
- UL approved for direct burial applications
- Complies with NEC 356
- Suitable for use in hazardous locations per NEC Article 500
- Class I, Div. 2; Classes II and III
- Standard package is shrinkwrapped coils
NEC ARTICLES
- Article 250.102 Equipment Bonding Jumpers
- Article 501.10, Class l, Div. 2: Classes ll and lll
- Article 502.10, Class ll, Div. 1 & 2
- Article 503.10, Class lll, Div. 1 & 2
- Article 620.21 Elevators, Escalators and Platform Lifts
- Article 680.42 Pools, Hot Tubs and Fountains
- Article 250.134 (B) Equipment Grounding
- Article 356 Liquid-Tight flexible nonmetallic conduit
USES
International Non-Metallic Liquid-Tight Conduit is designed for liquid-tight applications which are subject to vibration, movement, oil and corrosives. It is suitable for indoor and outdoor use, such as outdoor lighting, water treatment systems and HVAC equipment.
E l e c t r i c a l R e s o u r c e I n t e r n a t i o n a l
I N T E R N A T I O N A L
FLEXIBLE CONDUIT
INTERNATIONAL BRAND
Click Image to View or Download Complete Catalog
** Custom Order **
M-F, 9-4 EST:
440-878-1199
CONDUIT &
ACCESS.
CONDUIT
FITTINGS
BOXES
SAFETY
SPECIALTY
DATA
CONTACT
Can't find something?
JUST ASK.
CABLE TRAY
WEATHERPROOF
VAPOR PROOF
WIRING
DEVICES
ABOUT US
Coming to
Website Soon!
** Custom Order **
** Custom Order **
** Custom Order **
2017-18
Report Website Issues to webmaster@electrical-resource.com
